Increasing the Land Water (Creating Absorption Well / Biopori)

In certain areas, sometimes the water supply of land in the low rainfall is quite large. Here is one way to help overcome them, by making the wells “biopori”.

Absorption wells made this one of the ways to supply water to save our land. The process of water absorption of the land is not easy, but with this absorption well, we help drain the water into the soil surface. So, in addition to the supply of water in the soil, wells can also reduce flooding.

Make a well absorption not need large and deep. Self-making in the upper corner of the page. Making it easy cheap enough to use borehole biopori, that sold at Rp 175,000 per piece. Let's also save the earth by creating wells biopori!

Equipment and Materials 

• Drilling biopori.  

The Steps:

1. Specify the location of the wells, as desired. If the soil is dry, watering first, so that the process of drilling more easily. 
2. Make a hole in the ground to astigmatism, with a diameter of 10cm. Take the drill tool, drill perpendicular position the soil surface. Play drill clockwise, and the pressure necessary.
3. If all drilling bit being filled by earth, pull the drill up while continually turns around it is clockwise. 
4. Clear drilling bit, utilizing wood, bamboo, or dull knife, by presses flank in drilling bit. 
5. Go over step 2 to 4, until hole reaches 100cm's depth. 

Fill hole with waste organic of dry leaves, grass clipping, or kitchen waste.